Multifunctional 1-channel actuator with one input to activate/deactivate lights or other appliances featuring 1 input for integration of switches and other devices (110-240 V~). Featuring integrated logic module with comfort and timer functions, power measurements ans short circuit detection (1x 400 W @ 230 V~).
Functions
Technical Data
Category
| Category | |
|---|---|
| Article description | frogAct1-1 |
| Item number | A1-1-400.02 |
| Assembly type | Recess-mounted (in device socket) |
Functions and power
| Inputs | 1 (AC 110–240 V~) |
| Outputs | 1 (AC 110-240 V~) |
| Ausgänge Outputs can be dimmed | No |
| Minimum Load LED | 3 W |
| Max. Power per output | 400 W/400 VA (220-240 V~) |
| 200 W/200 VA (110-219 V~) | |
| Suitable loads | Light bulb load, electronic transformer, inductive load (no motor load) |
| Output modes | Switch |
| Protection category | conforms to IP20 |
| VDE Test Mark Certifications | |
| Integrated logic module | Yes |
| Integrated configuration backup | Yes |
| Comfort and timer function | Yes |
| Power measurement | Yes |
| Short circuit detection and notification | Yes |
Dimensions and weight
Dimensions (L x B x H): 53 x 48 x 21mm Weight: 30g
Connection example
| Box depth | min. 53 mm for installation behind switch insert |
| 63 mm recommended for installation behind switch insert |
Individual installation is required for shallower depts.
Electricity supply
| Mains voltage | AC 110-240 V~ |
| Mains frequency | 50 / 60 Hz |
| Stand-by-consumption | < 220 mW |
Network
| WLAN | No |
| Bluetooth® | Bluetooth® 4.2 Low Energy |
| Frequency range | 2400-2483,5 MHz max. 3,5 dBm |
| Typical radio open field range | 30 metres |
Operation and storage
| Ambient temperature | -25°C bis +50°C |
| Storage temperature | -25°C bis +70°C |
| Air humidity (during operation) | (Non-condensing) |
Power connection
| Contact type | ε, MOSFET |
| Connection variants | for bell, lamps, buttons, switches |
| Connection type | Spring-type terminal (single wire) |
| Wire cross section | 1-1,5 mm² (rigid conductor recommended) |
| stripping length | 8 mm |
Packaging
| Packaging size | 1 unit |
| EAN 1 unit | 4260578531085 |
| Packaging dimensions (L x B x H) 1 unit | 75 x 30 x 75 mm |
| Weight including packaging 1 unit | 50 g |
Note
A relay module (e.g. frogRelay2-2, frogRelay2-2-PF) must be utilised to control motor loads (e.g. roller shutter moter).
Subject to change. Electrical equipment may be installed and fitted only by qualified electricians.
Further information: www.frogblue.com